Euchner AS-i 3.0 Command Interface Bedienungsanleitung PDF herunterladen (Seite 52)

AS-i 3.0 Command Interface Commands of the Command Interface

Subject to reasonable modifications due to technical advances Id.-No.: 102875 Issue date - 3.12.2007 EUCHNER GmbH + Co. KG

Kohlhammerstraße 16, D-70771 Leinfelden-Echterdingen Tel. +49/711/7597-0, Fax +49/711/753316

Meaning of bit B:

B = 0 Single AS-i slave or A-slave

B = 1 B-slave

4.5.16 Write AS-i slave extended ID1 (WRITE_XID1)

With this call, the extended ID1 code of an AS-i slave with address "0" can be writ-

ten directly via the AS-i cable. The call is intended for diagnostic purposes and is

not required in the normal master mode.

The AS-i master passes the extended ID1 code on to the AS-i slave without any

plausibility check.

Response

byte

10D

2T result

Request

byte

13F

2T – circuit

3– xID1

Response

Byte

13F

2T result

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 97 98

Keine Kommentare

Euchner AS-i 3.0 Command Interface Bedienungsanleitung Seite 52